Workshop equipment
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
D63.10-0043-06
1 Cut side wall paneling (2) in character ridge (17) with following dimension (dotted line, 16):
b = approx. 35 mm.
2 Cut side wall paneling (2) along bottom edge (dotted line, 11).
D63.10-1198-05
3 Cut right side wall paneling bottom section (1) along front edge with following dimension (dotted line):
a = approx. 1 mm.
4 Punch dia. 6 mm holes over entire length of character ridge (17) at a maximum hole interval of 15 mm (arrows).
5 Grind right side wall paneling bottom section (1) down to bare metal on both sides in marked area and coat with zinc dust paint.
6 Hold right side wall paneling bottom section (1), align and clamp.