ar6310d591303b
Preparing right side wall paneling bottom section for installation
Type ar · emne 63.10 · version 0112 · 2006-10-31
Gælder for: MODEL 901.06 /36 /37 /46 /66 /67, 902.06 /07 /36 /37 /46 /47 /66 /67, 903.06 /07 /36 /37 /46 /47 /66 /67, 904.062 /362 /462 /662 MODEL 690.63 /64
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 3 Karrosseri › 63 Sidevæg › 63.10 Sidevæg — Serie 690 (modeller 63*, 64*) · Serie 901 (modeller 06*, 36*, 37*, 46*, 66*, 67*) · Serie 902 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 903 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 904 (modeller 062, 362, 462, 662)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.34 Sidevæg › 35.34.35 Skærm/sidevæg — Serie 690 (modeller 63*, 64*) · Serie 901 (modeller 06*, 36*, 37*, 46*, 66*, 67*) · Serie 902 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 903 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 904 (modeller 062, 362, 462, 662)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.34 Sidevæg › 35.34.39 Karrosseridel til højre — Serie 690 (modeller 63*, 64*) · Serie 901 (modeller 06*, 36*, 37*, 46*, 66*, 67*) · Serie 902 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 903 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 904 (modeller 062, 362, 462, 662)
AR63.10-D-5913-03B
| Preparing right side wall paneling bottom section for installation
|
|
|
WE58.40-Z-1003-03A
| Angle grinder (electric/pneumatic)
|
WE58.40-Z-1004-03A
| Body saw (electric/pneumatic)
|
Number
| Designation
| Order number
|
BR00.45-Z-1001-07A
| Zinc dust paint suitable for spot welding
| A 000 986 34 42
|
1 Separate side wall paneling (2) in character ridge (17) with the following dimension (dotted line, 16):
a = approx. 35 mm.
2 Separate right side wall paneling
bottom section (1) along front and rear edge with the following dimension (dotted line):
a = approx. 1 mm.
3 Punch 6 mm dia. holes over entire length of character ridge (17) and at a maximum hole interval of 15 mm (arrows).
4 Grind right side wall paneling bottom section (1) on both sides in marked area and coat with zinc dust paint.
5 Hold right side wall paneling bottom section (1), align and clamp.
