Weld in right side wall paneling up to window cutout
Type ar · emne 63.10 · version 0109 · 2006-07-26
Gælder for: MODEL 901.37 /67, 902.07 /37 /47 /67, 903.07 /37 /47 /67 with CODE (T16) Right cargo area sliding door with CODE (T19) Left cargo area sliding door MODEL 901.06 /36 /46 /66, 902.06 /36 /46 /66, 903.06 /36 /46 /66, 904.062 /362 /462 /662 with CODE (T16) Right cargo area sliding door with CODE (T19) Left cargo area sliding door mit Fenster in Seitenwand MODEL 690.63 with CODE (T16) Right cargo area sliding door mit Fenster in Seitenwand MODEL 690.64 with CODE (T16) Right cargo area sliding door
Weld in right side wall paneling up to window cutout
Commercially available tools
Number
Designation
WH58.30-Z-1001-40A
Tarp (fire-resistant)
Workshop equipment
WE58.40-Z-1001-02A
Inert gas welder
WE58.40-Z-1002-02A
Spot welder
WE58.40-Z-1003-02A
Multifunction device
WE58.40-Z-1003-03A
Angle grinder (electric/pneumatic)
WE58.40-Z-1004-03A
Body saw (electric/pneumatic)
D63.10-0060-06
1 Weld right side wall paneling bottom section (1) to side wall paneling upper section (19) and outer corner pillar paneling (5) ( , arrows).
D63.10-0061-06
2 Weld right side wall paneling (1) to C-pillar (12) ( , arrows).
3 Weld right side wall paneling (1) to cargo space sliding door entry (4) ( , 13).
D63.10-1148-12
To prevent the sheet metal parts from distorting, hold steel or copper block to side wall paneling from outside. The block (approx. 25mm x 25 mm x 200 mm) should make full contact.
4 Weld right side wall paneling to side wall inner section (10) or , arrows).
D63.10-0014-01
5 Weld right side wall paneling (1) to front inner side wall section and wheelhouse ( , arrows).
D63.10-0015-01
6 Weld right side wall paneling (1) to rear inner side wall section and wheelhouse ( , arrows).
D63.10-1149-12
7 Cut out window cutout of side wall along inner section of side wall (dotted line).
