Serier
da
ar6310d589203a
Preparing right side wall paneling up to window cutout for installation
Type ar · emne 63.10 · version 0113 · 2006-10-31
Gælder for: MODEL 901.37 /67, 902.07 /37 /47 /67, 903.07 /37 /47 /67 with CODE (T16) Right cargo area sliding door with CODE (T19) Left cargo area sliding door MODEL 901.06 /36 /46 /66, 902.06 /36 /46 /66, 903.06 /36 /46 /66, 904.062 /362 /462 /662 with CODE (T16) Right cargo area sliding door with CODE (T19) Left cargo area sliding door mit Fenster in Seitenwand MODEL 690.63 with CODE (T16) Right cargo area sliding door mit Fenster in Seitenwand MODEL 690.64 with CODE (T16) Right cargo area sliding door
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 3 Karrosseri › 63 Sidevæg › 63.10 Sidevæg — Serie 690 (modeller 63*, 64*) · Serie 901 (modeller 06*, 36*, 37*, 46*, 66*, 67*) · Serie 902 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 903 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 904 (modeller 062, 362, 462, 662)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.34 Sidevæg › 35.34.35 Skærm/sidevæg — Serie 690 (modeller 63*, 64*) · Serie 901 (modeller 06*, 36*, 37*, 46*, 66*, 67*) · Serie 902 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 903 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 904 (modeller 062, 362, 462, 662)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.34 Sidevæg › 35.34.39 Karrosseridel til højre — Serie 690 (modeller 63*, 64*) · Serie 901 (modeller 06*, 36*, 37*, 46*, 66*, 67*) · Serie 902 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 903 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 904 (modeller 062, 362, 462, 662)
AR63.10-D-5892-03A
Preparing right side wall paneling up to window cutout for installation
WE58.40-Z-1003-03A
Angle grinder (electric/pneumatic)
WE58.40-Z-1004-03A
Body saw (electric/pneumatic)
Number
Designation
Order number
BR00.45-Z-1001-07A
Zinc dust paint suitable for spot welding
A 000 986 34 42
1 Separate front and rear side wall paneling (2) above bottom window frame with the following dimension (dotted line, 16):
a = approx. 50 mm.
2 Punch uniform 6 mm dia. holes in right side wall paneling (1) and at a maximum hole interval of 50 mm (arrows).
3 Separate right side wall paneling (1) along bottom edge (dotted line, 11).
4 Separate right side wall paneling (1) along rear edge with the following dimension (dotted line):
b = approx. 1 mm.
5 Grind right side wall paneling (1) on both sides in marked area and coat with zinc dust paint.
6 Hold right side wall paneling (1), align and clamp.
