Gælder for: MODEL 901.06 /36 /37 /46 /66 /67, 902.06 /07 /36 /37 /46 /47 /66 /67, 903.06 /07 /36 /37 /46 /47 /66 /67, 904.062 /362 /462 /662 with CODE (T16) Right cargo area sliding door with CODE (T19) Left cargo area sliding door Seitenwand ohne Fenster MODEL 690.63 /64 with CODE (T16) Right cargo area sliding door Seitenwand ohne Fenster
1 Weld right side wall paneling (1) to drip molding (6) and C-pillar (12) ( , arrows).
2 Weld right side wall paneling (1) to outer sliding door entry (4) ( , 13).
D63.10-0012-12
To prevent the sheet metal parts from distorting, hold steel or copper block to side wall paneling from outside. The block (approx. 25mm x 25 mm x 200 mm) should make full contact.
3 Weld right side wall paneling (1) to side wall inner section (10 ( or , arrows).
4 Weld right side wall paneling (1) to corner pillar paneling (5) ( , arrows).
D63.10-0013-03
D63.10-0014-01
5 Weld right side wall paneling (1) to front inner side wall section and wheelhouse ( , arrows).
D63.10-0015-01
6 Weld right side wall paneling (1) to rear inner side wall section and wheelhouse ( , arrows).
