ar6310d588603a

Preparing right side wall paneling for installation

Type ar · emne 63.10 · version 0113 · 2006-10-31

Gælder for: MODEL 901.06 /36 /37 /46 /66 /67, 902.06 /07 /36 /37 /46 /47 /66 /67, 903.06 /07 /36 /37 /46 /47 /66 /67, 904.062 /362 /462 /662 with CODE (T16) Right cargo area sliding door with CODE (T19) Left cargo area sliding door MODEL 690.63 /64 with CODE (T16) Right cargo area sliding door

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 63 Sidevæg › 63.10 Sidevæg — Serie 690 (modeller 63*, 64*) · Serie 901 (modeller 06*, 36*, 37*, 46*, 66*, 67*) · Serie 902 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 903 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 904 (modeller 062, 362, 462, 662)

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.34 Sidevæg › 35.34.35 Skærm/sidevæg — Serie 690 (modeller 63*, 64*) · Serie 901 (modeller 06*, 36*, 37*, 46*, 66*, 67*) · Serie 902 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 903 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 904 (modeller 062, 362, 462, 662)

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.34 Sidevæg › 35.34.39 Karrosseridel til højre — Serie 690 (modeller 63*, 64*) · Serie 901 (modeller 06*, 36*, 37*, 46*, 66*, 67*) · Serie 902 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 903 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 904 (modeller 062, 362, 462, 662)

AR63.10-D-5886-03A

Preparing right side wall paneling for installation

Workshop equipment

WE58.40-Z-1003-03A

Angle grinder (electric/pneumatic)

WE58.40-Z-1004-03A

Body saw (electric/pneumatic)

Repair materials

Number

Designation

Order number

BR00.45-Z-1001-07A

Zinc dust paint suitable for spot welding

A 000 986 34 42

Preparing right side wall paneling for installation

D63.10-0008-06

1 Punch uniform 6 mm dia. holes in right side wall paneling (1) and at a maximum hole interval of 50 mm (arrows).

2 Separate right side wall paneling (1) along bottom edge (dotted line, 11).

Preparing right side wall paneling for installation

D63.10-0009-06

3 Separate right side wall paneling (1) along rear edge with the following dimension (dotted line):

a = approx. 1 mm.

4 Grind right side wall paneling (1) on both sides in marked area and coat with zinc dust paint.

Preparing right side wall paneling for installation

D63.10-0010-12

5 Hold right side wall paneling (1), align and clamp.