ar6230d000105b
Prepare front section of front frame cross member for installation
Type ar · emne 62.30 · version 0103 · 2006-10-31
Gælder for: MODEL 901.6, 902.6, 903.6, 904.6, 905.6, 690.6
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 3 Karrosseri › 62 Front og torpedo › 62.30 Tværdragere og afstivning fortil — Serie 690 (modeller 6**) · Serie 901 (modeller 6**) · Serie 902 (modeller 6**) · Serie 903 (modeller 6**) · Serie 904 (modeller 6**) · Serie 905 (modeller 6**)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.30 Front › 35.30.35 Bærearm/hjulkasse — Serie 690 (modeller 6**) · Serie 901 (modeller 6**) · Serie 902 (modeller 6**) · Serie 903 (modeller 6**) · Serie 904 (modeller 6**) · Serie 905 (modeller 6**)
AR62.30-D-0001-05B
| Prepare front section of front frame cross member for installation
|
|
|
Commercially available tools
Number
| Designation
|
|
WH58.30-Z-1001-03A
| Round wire brush, braided, dia. 70 mm
|
|
WH58.30-Z-1024-04A
| Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm)
|
|
WE58.40-Z-1001-03A
| Drill (electric/pneumatic)
|
WE58.40-Z-1002-03A
| Straight grinder (electric/pneumatic)
|
WE58.40-Z-1003-03A
| Angle grinder (electric/pneumatic)
|
Number
| Designation
| Order number
|
BR00.45-Z-1001-07A
| Zinc dust paint suitable for spot welding
| A 000 986 34 42
|
1 Grind off front section (2) of front frame crossmember in marked area on both sides and coat with zinc dust paint.
2 Hold front section (2) of front frame crossmember against vehicle, align and clamp in position.
