ar6210d5750a

Removing and installing front end paneling

Type ar · emne 62.10 · version 0102 · 2004-10-21

Gælder for: MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 62 Front og torpedo › 62.10 Front — Serie 901 (modeller 0**, 3**, 4**) · Serie 902 (modeller 0**, 3**, 4**) · Serie 903 (modeller 0**, 3**, 4**) · Serie 904 (modeller 0**, 3**, 4**)

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.30 Front › 35.30.30 Front komplet — Serie 901 (modeller 0**, 3**, 4**) · Serie 902 (modeller 0**, 3**, 4**) · Serie 903 (modeller 0**, 3**, 4**) · Serie 904 (modeller 0**, 3**, 4**)

AR62.10-D-5750A

Removing and installing front end paneling

6.11.95

MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

Removing and installing front end paneling

D62.10-0001-09

Removal, installation

1

Remove front bumper

AR88.20-D-2000B

2

Remove turn signal lamps and front end center element (a) with head lamps

AR88.30-D-2302A

3

Unscrew bolts (7) on A-pillar

4

Remove sealant (18) between wheelhouse and fender

5

Unscrew bolts (19, 20, 21 and 22)

6

Drill out spreading pins (24) and pull off bumper mount (23)

7

Pull connector off of auxiliary turn signal lamp

8

Remove fender

Remove sealant residues.

9

Reinstall in opposite order

Before installing spray fender on inside with underbody protection agent.
Seal inside of fender at wheel well and wheel well transition.

Henviste dokumenter