ar6140p1010m

Remove/install transmission skid plate

Type ar · emne 61.40 · version 0100 · 2006-07-25

Gælder for: MODEL 220.175 /176 /178 with CODE (Z07) Top protection

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 61 Undervogn › 61.40 Undervognsbeskyttelse — Serie 220 (modeller 175, 176, 178)

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.25 dæmpningselement/afdækning forneden/tætning/undervognsbeklædning › 35.25.41 undervognsbeklædning/støjindkapsling/undervognsbeklædning — Serie 220 (modeller 175, 176, 178)

AR61.40-P-1010M

Remove/install transmission skid plate

13.4.05

MODEL 220.175 /176 /178 with CODE (Z07) Top protection

Remove/install transmission skid plate

P61.40-2010-06

1 Bolts

2 Transmission skid plate

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the four pillars of the hoist and position the four support plates at the hoist mounting points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Lift vehicle on lifting platform.

2

Unscrew bolts (1)

Secure transmission skid plate (2) against falling down with transmission jack

Installation: Observe bolt length

Bolt, armor plate to transmission

*BA61.40-P-1002-01A

Telescopic transmission jack, 0.5 to 1.0 t

*WE58.40-Z-1030-11A

3

Remove transmission skid plate (2)

4

Install in the reverse order

Underride guard

Number

Designation

Model 220 with code Z07

BA61.40-P-1002-01A

Bolt, armor plate to transmission

M6

Nm

14

Workshop equipment

WE58.40-Z-1030-11A

Transmission jack

Henviste dokumenter