Remove/install skid

AR61.40-P-1000MB

Remove/install skid

8.6.01



Remove/install

 Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the four pillars of the hoist and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Jack up vehicle

 Position lifting platform pillar support plates on lifting platform support points specified by the automotive manufacturer so that skid plates on underfloor can be removed.

2.1

Remove pipes of fire extinguishing system (arrows) around skid plate longitudinal members.

 Only on vehicles with fire extinguisher system.

3

Remove left and right front skid plates
(1, 2).

 Bolt, armor plate to armor plate/underfloor

*BA61.40-P-1001-01A

4

Remove skid plate fuel and brake lines (6).

 Bolt, armor plate to armor plate/underfloor

*BA61.40-P-1001-01A

5.1

Remove rear fire extinguisher system temperature sensor (B65/1) with bracket and fasten to underbody.

 Only on vehicles with fire extinguisher system.

 Do not disconnect electrical line from rear fire extinguisher system temperature sensor (B65/1), otherwise the fire extinguishing system may be activated.

 Installation: Ensure that the electrical line to the rear fire extinguisher system temperature sensor (B65/1) is routed without tension and without pinching or chafing points to prevent damaging the fire extinguishing system.

6

Remove left and right rear skid plates (3, 4).

Installation: Ensure that the electrical line to the rear fire extinguisher system temperature sensor (B65/1) is not pinched to prevent damaging the fire extinguishing system.

 Bolt, armor plate to armor plate/underfloor

*BA61.40-P-1001-01A

7

Remove exhaust system as of flange connection

Model 220.175

AR49.10-P-7000AA

Model 220.176

AR49.10-P-7000IM

Model 220.178

AR49.10-P-7000L

8

Remove center tunnel skid plate (7).

 Bolt, armor plate to armor plate/underfloor

*BA61.40-P-1001-01A

9

Remove muffler skid plate (5)

 Bolt, armor plate to armor plate/underfloor

*BA61.40-P-1001-01A

10

Install in the reverse order

Number

Designation

Model 220 with code Z07

BA61.40-P-1001-01A

Bolt, armor plate to armor plate/underfloor

M6

Nm

14

M8

Nm

25