ar6130p1001rr

Remove/install underfloor paneling

Type ar · emne 61.30 · version 0101 · 2005-11-02

Gælder for: MODEL 452.3/ 4

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 61 Undervogn › 61.30 Stænklapper — Serie 452 (modeller 3**, 4**)

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.25 dæmpningselement/afdækning forneden/tætning/undervognsbeklædning › 35.25.41 undervognsbeklædning/støjindkapsling/undervognsbeklædning — Serie 452 (modeller 3**, 4**)

AR61.30-P-1001RR

Remove/install underfloor paneling

5.2.03

MODEL 452.3/ 4

Remove/install underfloor paneling

P61.30-2007-10

1 Rear paneling

2 Front paneling

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Raise vehicle with lifting platform

When positioning lifting platform observe recesses in covers.

2

Unscrew nuts from rear paneling (1)

3.1

Unscrew nut, bracket on rear paneling (1)

Only model 452.3/ 4 with engine 160.923.

*BA09.41-P-1006-03B

4

Remove rear paneling (1)

5

Unscrew bolts from front paneling (2)

6

Unscrew nuts from front paneling (2)

7

Unclip front paneling (2) from CBS front end.

Do not damage CBS front end.

Mounting wedge

*110589035900

8

Remove front paneling (2)

9

Install in the reverse order

Charge air cooler water cooled

Number

Designation

Engine
160.923

BA09.41-P-1006-03B

Nut, bracket to rear underfloor paneling

Nm

2

Remove/install underfloor paneling

Mounting wedge

110 589 03 59 00

Henviste dokumenter