AR61.30-D-1002-02TE | Remove/install underbody trim at left on high-voltage battery carrier | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system |
D61.30-A003-79
Underfloor paneling (2) must already be released for this purpose.
1 | Remove bolt (3) . |
2 | Remove expansion rivets (4). |
Installation: Check expansion rivets (4) for damage. |
In the case of a corresponding finding, |
|
replace damaged expansion rivets (4). |
3 | Remove underfloor paneling (1). |
To do so, remove nuts (5). |
4 | Install in the reverse order. |
Henviste dokumenter
- ah0000z030001a Generelle oplysninger ved køretøjer med højvoltsnet og/eller litium-ion-batteri og/eller gasdrivsystem samt personligt beskyttelsesudstyr
- as0000z001001a Livsfare, hvis køretøjet glider ned fra eller tipper på liften.
- as0000z003501a Livsfare ved arbejde på komponenter og systemer med U >= 30 V vekselspænding (AC) eller U >= 60 V jævnspænding (DC)