Remove/install right underbody paneling · ar6130d100101ts · Mercedes-Benz WIS

AR61.30-D-1001-01TS	Remove/install right underbody paneling
 Danger	Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)	Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.Model 910 with engine 780.703	AS00.00-Z-0035-01A
 Danger	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
Topical note	General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system		AH00.00-Z-0300-01A

Model

907, 910

Modification notes

12.07.2019

Method extended

Operation steps 1, 2

 The left underfloor paneling must already have been removed.

Shown on model 910 with engine 780.703

D61.30-A000-81

1.1	Model 907 Model 910 with engine 651 Remove bolt (3) .

1.2	Model 910 with engine 780.703 Remove screw/bolts (3).

2	Model 910 with engine 780.703 Remove expansion rivet (4).

 Installation: Check expansion rivet (4) for damage.

	In the case of a corresponding finding,
	
	replace expansion rivet (4).

3	Remove right underfloor paneling (1).

 For this purpose, remove nuts (2).

4	Install in the reverse order.

Shown on model 907

D61.30-0003-11

ah0000z030001a Generelle oplysninger ved køretøjer med højvoltsnet og/eller litium-ion-batteri og/eller gasdrivsystem samt personligt beskyttelsesudstyr
as0000z001001a Livsfare, hvis køretøjet glider ned fra eller tipper på liften.
as0000z003501a Livsfare ved arbejde på komponenter og systemer med U >= 30 V vekselspænding (AC) eller U >= 60 V jævnspænding (DC)