Serier
da
ar6110w572004a
Prepare front floor for installation
Type ar · emne 61.10 · version 0104 · 2006-10-31
Gælder for: BODY 374.850 in MODEL 374.4 BODY 374.860 in MODEL 374.5 BODY 374.870 in MODEL 374.6 BODY 375.810 in MODEL 375.3 BODY 375.830 in MODEL 375.1 BODY 375.840 in MODEL 375.4 BODY 940.890 /899 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 BODY 944.890 in MODEL 940.2 /3, 942.1 /3, 943.1 /3, 944.0 /2 BODY 944.899 in MODEL 944.0 /2 BODY 958.860 in MODEL 958.0 BODY 958.870 in MODEL 958.2 BODY 958.880 in MODEL 958.4 BODY 972.890 /899 in MODEL 970, 972, 974, 975, 976
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 3 Karrosseri › 61 Undervogn › 61.10 Rammebund — Serie 374 (modeller 4**, 5**, 6**, 850, 860, 870) · Serie 375 (modeller 1**, 3**, 4**, 810, 830, 840) · Serie 940 (modeller 2**, 3**, 890, 899) · Serie 942 (modeller 1**, 3**) · Serie 943 (modeller 1**, 3**) · Serie 944 (modeller 0**, 2**, 890, 899) · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 958 (modeller 0**, 2**, 4**, 860, 870, 880) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.32 undervogn › 35.32.35 bundgruppe/undervogsstel — Serie 374 (modeller 4**, 5**, 6**, 850, 860, 870) · Serie 375 (modeller 1**, 3**, 4**, 810, 830, 840) · Serie 940 (modeller 2**, 3**, 890, 899) · Serie 942 (modeller 1**, 3**) · Serie 943 (modeller 1**, 3**) · Serie 944 (modeller 0**, 2**, 890, 899) · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 958 (modeller 0**, 2**, 4**, 860, 870, 880) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976
AR61.10-W-5720-04A
Prepare front floor for installation
Commercially available tools
Number
Designation
WH58.30-Z-1002-02A
Hole punching pliers, dia. 7 mm
WH58.30-Z-1001-03A
Round wire brush, braided, dia. 70 mm
WH58.30-Z-1024-04A
Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm)
WE58.40-Z-1001-03A
Drill (electric/pneumatic)
WE58.40-Z-1003-03A
Angle grinder (electric/pneumatic)
WE58.40-Z-1005-03A
Wet/dry vacuum cleaner
Number
Designation
Order number
BR00.45-Z-1001-07A
Zinc dust paint suitable for spot welding
A 000 986 34 42
1 Punch holes for plug welding in areas A to C.
2 Grind mating surfaces down to bare metal in areas D to F on both sides.
3 Coat spot weld flange in shaded areas on both sides and insides of spot weld flange with zinc dust paint.
4 Punch holes for plug welding in areas G and H.
5 Grind mating surfaces down to bare metal in areas I and J on both sides.
6 Grind mating surfaces down to bare metal in areas K and L on both sides.
7 Coat spot weld flange in shaded areas on both sides and insides of spot weld flange with zinc dust paint.
