Remove/install diagonal strut · ar6110p5138rt · Mercedes-Benz WIS

AR61.10-P-5138RT

Remove/install diagonal strut

21.11.05

MODEL 251 with CODE (413) Panoramic glass roof with top sliding roof

P61.10-2160-07

Shown on model 251 with engine 113, underfloor paneling removed for better illustration

1 Central bolt

2 Bolts on spare wheel recess

3 Nuts on longitudinal member

4 Nuts on rubber/metal bearing

 	Remove/install
Danger!	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
	Notes on self-locking nuts and bolts	All models	AH00.00-N-0001-01A
	The scissor strut should not be distorted.If necessary, loosen and retighten all bolts.Tighten central bolt (1) last.
1	Raise vehicle with lifting platform		AR00.60-P-1000RT
2	Loosen central bolt (1).	 Loosen only, do not unscrew.
			*BA61.10-P-1002-01F
3	Unscrew nuts from longitudinal member (3).	 On both sides of vehicle.
			*BA61.10-P-1004-01F
4	Unscrew bolts from spare wheel recess (2).		*BA61.10-P-1001-01F
5	Unscrew nuts from rubber/metal bearing (4) and remove scissor strut.		*BA61.10-P-1003-01F
6	Check scissor strut for deformation and damage, replace if necessary.
7	Install in the reverse order

 Frame floor assembly

Number	Designation		Model 251


BA61.10-P-1001-01F	Bolt, scissor strut to spare wheel well	Nm	55
BA61.10-P-1002-01F	Central bolt for scissor strut	Nm	18
BA61.10-P-1003-01F	Nut, scissor strut/acoustic strut to rubber-metal bushing	Nm	55
BA61.10-P-1004-01F	Nut, scissor strut/acoustic strut to longitudinal member	Nm	55