ar6110d610201a

Separating end cross member

Type ar · emne 61.10 · version 0105 · 2006-07-25

Gælder for: MODEL 901.06 /36 /37 /46 /66 /67, 902.06 /07 /36 /37 /46 /47 /66 /67, 903.06 /07 /36 /37 /46 /47 /66 /67, 904.06 /36 /46 /66 MODEL 690.63 /64

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 61 Undervogn › 61.10 Rammebund — Serie 690 (modeller 63*, 64*) · Serie 901 (modeller 06*, 36*, 37*, 46*, 66*, 67*) · Serie 902 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 903 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 904 (modeller 06*, 36*, 46*, 66*)

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.31 Bagvæg/hæk › 35.31.30 Bagvæg/hæk — Serie 690 (modeller 63*, 64*) · Serie 901 (modeller 06*, 36*, 37*, 46*, 66*, 67*) · Serie 902 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 903 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 904 (modeller 06*, 36*, 46*, 66*)

AR61.10-D-6102-01A

Separating end cross member

Separating end cross member

201 589 00 51 00

Spot weld miller

Workshop equipment

WE58.40-Z-1001-03A

Drill (electric/pneumatic)

WE58.40-Z-1003-03A

Angle grinder (electric/pneumatic)

WE58.40-Z-1004-03A

Body saw (electric/pneumatic)

WE58.40-Z-1005-03A

Wet/dry vacuum cleaner

Separating end cross member

D61.10-0026-06

1 Cut spot welds out of floor panel (2) and inner corner pillar paneling (6) (arrows).

Separating end cross member

D61.10-0027-10

The following steps apply for the right side of the vehicle and must be performed on the left side with locations reversed.

2 Cut 8 spot welds out of end cross member (1) behind longitudinal member (arrows).

Separating end cross member

D61.10-0028-10

3 Separate end cross member (1) around longitudinal member mount (dotted line).

Separating end cross member

D61.10-0029-10

4 Separate end cross member (1) along outer longitudinal member (9) (dotted line).