Remove/install suspension strut for front cab mounting · ar6080w0040a · Mercedes-Benz WIS

AR60.80-W-0040A

Remove/install suspension strut for front cab mounting

14.12.09

BODY 375.810 /840, 944.899, 940.899

BODY 942.899 except CODE (FL2) Air-sprung comfort cab suspension

W60.80-1039-06

Shown on body 942.899

1  Tensioning device

2 Suspension strut

Modification notes

26.6.06	Nut, suspension strut to front cab mounting	Body 374.870 in model 374.6, body 375.840/860 in model 375.4, body 944.890 in model 374.6, 940.1/2/3, 942.1/3, 943.1/3, 944.0/1/2, body 944.899 in model 944.0/2, body 958.880 in model 958.4	*BA60.80-N-1007-01B
	Nut, suspension strut to stabilizer	Body 374.870 in model 374.6, body 375.840/860 in model 375.4, body 944.890 in model 374.6, 940.1/2/3, 942.1/3, 943.1/3, 944.0/1/2, body 944.899 in model 944.0/2, body 958.880 in model 958.4	*BA60.80-N-1011-01B

 	Remove/install
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
1	Open front flap
2	Remove air grille from front end	 Only on body 944.899, 375.810 and 940.899
 Danger!	Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension	Use only approved tensioning devices; shield off hazard area if necessary. Inspect special tools for damage and proper operation (visual inspection). Wear protective gloves.	AS00.00-Z-0001-01A
3	Install tensioning device (1) with clamping plates on suspension strut and remove suspension strut (2)	Pull suspension strut out of upper bearing and turn toward front.
			*BA60.80-N-1007-01B
			*BA60.80-N-1011-01B
			*210589003100
			*950589003200
4	Install in the reverse order

 Cab mounting

Number	Designation			Body 375.810 /820 in model 375.3	Body 375.840 /860 in model 375.4


BA60.80-N-1007-01B	Nut, suspension strut to front cab mounting	M141.5	Nm	163	163
BA60.80-N-1011-01B	Nut, suspension strut to stabilizer		Nm	163	163

 Cab mounting

Number	Designation			Body 940.890/899 in model 950.5/6, 952.5/6, 953.6, 954.5	Body 942.899 in model 950.0/1/2/3, 952.0/1/2/3, 953.1/3, 954.0/1/2


BA60.80-N-1007-01B	Nut, suspension strut to front cab mounting	M141.5	Nm	163	85
BA60.80-N-1011-01B	Nut, suspension strut to stabilizer		Nm	163	85

 Cab mounting

Number	Designation			Body 944.899 in Model 944


BA60.80-N-1007-01B	Nut, suspension strut to front cab mounting	M141.5	Nm	163
BA60.80-N-1011-01B	Nut, suspension strut to stabilizer		Nm	163

950 589 00 32 00

Tensioning plates

Tensioning device

210 589 00 31 00

ah0000n000101a Oplysninger om selvlåsende bolte og møtrikker
as0000z000101a Fare for kvæstelse på grund af fastklemning og knusning ved arbejde på fjedre eller fjederlegemer, som er under forspænding