Model | 470 |
with code Y1P (Hard cover) | |
except code Y1Q (Polished roll bar (styling bar)) | |
except code Y1R (Black roll bar (styling bar)) | |
Model | 470 |
with code Y1P (Hard cover) | |
with code Y1Q (Polished roll bar (styling bar)) | |
Model | 470 |
with code Y1P (Hard cover) | |
with code Y1R (Black roll bar (styling bar)) |
S60.30-A013-09
1 | Cover | 3 | Linkage rod | |
2 | Expansion rivet | 4 | Lock |
S60.30-A014-09
3 | Linkage rod | 6 | Lock | |
5 | Bolts |
Warning | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
| Remove/install | ||
1 | Open platform cover. | ||
2 | Remove cover (1) in direction of arrow (A). | To do so, remove the expansion rivets (2). | |
Installation: Replace expansion rivet (2). | |||
3 | Remove respective linkage (3) in direction of arrow (B). | For this purpose, release lock (4) in direction of arrow (C). | |
4 | Remove screws (5) at corresponding vehicle side. | Screw, lock to platform cover | |
5 | Remove lock (6). | For this purpose, pull out lock (6) in direction of arrow (D) until lock (6) at linkage (3) can be detached. | |
6 | Install in the reverse order. | ||
7 | Adjust locking mechanism of platform cover. | ||
| |||
Nut, mounting frame bow to platform cover rail | |||
Box wrench bit | |||
| Check | ||
8 | Check function of lock (6). |
000 589 75 03 00
Box wrench bit
Henviste dokumenter
- an6030s002502p
- as0000z001101a Fare for personskade pga. fastklemning eller knusning af fingre ved af-, påmontering og indstillingsarbejde på motorhjelm og bagklap, døre, dæksler og soltag.