Workshop equipment
WE58.40-Z-1010-01B | Celette straightening set 7000.300 (for model 638) |
WE58.40-Z-1011-01B | Modular member set 955.900 |
WE58.40-Z-1001-01E | Celette straightening bench |
WE58.40-Z-1006-01E | Celette Multi-Z straightening set system |
S60.10-0001-09
1,2 Fixture for front attachment point
for cross member on longitudinal member with basic part MZ 260
3,4 Fixture for front attachment point
for axle/engine subframe with basic part MZ 141
5 Attachment for fixtures 3 and 4
6,7 Fixture for spring strut support for basic part MZ 601 or 602
13,14 Fixture for jack socket
B.33 Gauge and locating pin for fixtures 13 and 14
15 Front longitudinal member fxixture with basic part MZ 200
8 Gauge and locating plate for fixtures 6 and 7
9,10 Fixtures for rear attachment point for axle/engine subframe with basic part M080
11 Spacer sleeve for fixture 9 or 10
12 Attachment for fixture 9 or 10
Observe assembly plans included with straightening set. The item no. in combination with 6-digit reference number 7000.70 - -,
is also the order number for replacement.
1 Position MZ 260 on straightening bench and insert fixture
(1, 2). Pivot fixture (1, 2) toward front.
2 Position MZ 141 and MZ 142 on straightening bench and insert fixture (3, 4). Fasten attachment (5) between fixture and body.
3 Position MZ 601 and MZ602 on straightening bench and insert fixture (6, 7). Fasten gauge and locating plate (8) with fixture (6, 7) after setting body onto straightening bench.
4 Position MZ 080 on straightening bench and insert fixture
(9, 10). Position attachment (12) and spacer sleeve (11) and fasten with fixture (9, 10).
Use fixture (9, 10) with spacer sleeve (11) and attachment (12)
in combination with MZ 080 as front support for rear end repair.
5 Position MZ 200 on straightening bench and insert longitudinal member fixture (15) and fasten.
6 Do not insert fixture (14, 15 and B33) and do not install on straightening bench until body is positioned.
S60.10-0002-09
16,17 Fixture for outer rear A-arm with basic part MZ 080
E.16 Spacer tube
18 Plate for positioning outer rear
A-arm
24,25 Rear longitudinal member positioning with basic part MZ 200
26,27 Fixture for rear end cross member with basic part MZ 140
19,20 Fixture for inner rear A-arm,
with basic part MZ 080
21 Locating pins for fixtures 19 and 20
22,23 Fixtures on rear shock absorber fixtures with basic part MZ 260
Observe assembly plans included with straightening set. The item no. in combination with 6-digit reference number 7000.70 - -,
is also the order number for replacement.
7 Position MZ 080 for fixture (16, 17, 19, 20) on straightening bench.
8 Screw down fixture (16, 17) on body with spacer sleeve (E16). Fasten plate (18) with associated bolts.
Use fixture (16, 17) with spacer sleeve (E16) and plate (18) in combination with MZ 080 as rear support for front end repair.
9 Position fixture (19, 20) on body, insert locating pins (21).
10 Position MZ 260 on straightening bench. Insert fixture
(22, 23).
Do not tighten MZ 260 until body is set onto straightening bench.
11 Position MZ 200 on straightening bench. Insert fixture
(24, 25).
12 Position MZ 140 on straightening bench, only screw on bolts a few threads. Insert fixture (26, 27).
Fixtures (26, 27) should tip downward to the rear.