ar6000p080002gc

Stamping in vehicle identification number

Type ar · emne 60.00 · version 0101 · 2003-03-12

Gælder for: MODEL 168, 414.700

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 60 Karrosseri generelt › 60.00 Generelt — Serie 168 · Serie 414 (modeller 700)

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.20 Førerhus/karrosseri › 35.20.30 Førerhus — Serie 168 · Serie 414 (modeller 700)

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.20 Førerhus/karrosseri › 35.20.40 Karrosseri råkarrosseri — Serie 168 · Serie 414 (modeller 700)

AR60.00-P-0800-02GC

Stamping in vehicle identification number

Stamping in vehicle identification number
Stamping in vehicle identification number
Stamping in vehicle identification number
Stamping in vehicle identification number

170 589 01 63 00

Set of number punches

Number punch guide

Number punch guide

Set of letter punches

168 589 01 63 00

140 589 26 63 00

140 589 26 63 05

Stamping in vehicle identification number
Stamping in vehicle identification number

P60.00-0521-01

1 Start with the "Mercedes star" punch in the window plate at the bottom left (arrow). The tip of the Mercedes star should point upward in the script.

2 Then position the "W" punch with the left edge at the first line in the window plate and punch in.

3 Advance one line in the window plate with each subsequent number punch until the complete vehicle identification number and final Mercedes star has been punched in.

P60.00-0516-01