AR55.50-B-0600-02A | Opening cable lock | ||
Danger! | Risk of injuries caused by smashing or catching, in extreme cases, by cutting off members touched by mechanic parts. | Considering the components movement, no body part or ends should be inside the area in which the mechanic parts move. |
T55.50-0008-01
1 Rear and front unit union cable jaw
2 Screw
3 Locknut
4 Spinning articulation union cable jaw
5 Clips with closure device
6 Tensioning part
7 Locknut
Open the cable union jaw in the front and rear units (1).
1 Loosen the counter nuts (3).
2 Unscrew each of the bolts (2) approximately 7 mm, until the cable is no more stretched.
Eventually, hold the hooks when unscrewing the bolts (2).
3 Open the cable union jaw in the front and rear units (1) turning the cam.
4 Remove the rings from the hooks
Open the cable union jaw in the spinning articulation (4).
1 Unfasten the counter nuts (7).
2 Turn the tensioning piece (6) until the cable is no more stretched
Eventually, hold the clips (5) while turning the tensioning pieces (6).
3 Disassemble the rings from the clips (5).