ar5465s0027p

Remove/install rear PARKTRONIC sensor

Type ar · emne 54.65 · version 0101 · 2020-06-16

Gælder for: Model 470, 471 with code EZ8 (PARKTRONIC Park Assist)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.65 Parkeringshjælp — Serie 470 · Serie 471

EinPAS 28 Komfort-/førerassistancesystem › 28.15 parkeringsassistent › 28.15.12 Sensor/kontakt/ledningssæt — Serie 470 · Serie 471

AR54.65-S-0027P

Remove/install rear PARKTRONIC sensor

16.06.2020

Model

470, 471

with code EZ8 (PARKTRONIC Park Assist)

Remove/install rear PARKTRONIC sensor

S54.65-4696-08

Shown on left outer PARKTRONIC sensor (2) on model 470

1

Electrical connector

3

Bracket

4

Seal

2

PARKTRONIC sensor

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Disconnect electrical connector (1)

2

Release catch hook in direction of arrow and pull PARKTRONIC sensor (2) forwards out of the holder (3)

3

Check seal (4) for signs of damage and correct seating

If seal (4) is damaged.

Install new seal (4).

If the seal (4) is not correctly seated on the PARKTRONIC sensor (2).

Correctly position seal (4).

4

Install in the reverse order

Check

5

Perform function check for PARKTRONIC

Henviste dokumenter