ar5465s000102e

Remove/install sensors for center Parktronic system (PTS) in front bumper

Type ar · emne 54.65 · version 0104 · 2018-10-29

Gælder for: Model 447.6/7, 448.7 with code EZ7 (Active Parking Assist) Model 447.8, 448.8 with code EZ7 (Active Parking Assist) except code PS2 (AMG line)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.65 Parkeringshjælp — Serie 447 (modeller 6**, 7**, 8**) · Serie 448 (modeller 7**, 8**)

EinPAS 28 Komfort-/førerassistancesystem › 28.15 parkeringsassistent › 28.15.12 Sensor/kontakt/ledningssæt — Serie 447 (modeller 6**, 7**, 8**) · Serie 448 (modeller 7**, 8**)

AR54.65-S-0001-02E

Remove/install sensors for center Parktronic system (PTS) in front bumper

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Model

447.6/7, 448.7

with code EZ7 (Active Parking Assist)

Model

447.8, 448.8

with code EZ7 (Active Parking Assist)

except code PS2 (AMG line)

Remove/install sensors for center Parktronic system (PTS) in front bumper
Remove/install sensors for center Parktronic system (PTS) in front bumper

1

Disconnect electrical connection at PARKTRONIC sensor, center left front (B8/17) or PARKTRONIC sensor, center right front (B8/20).


S54.65-4566-01

S54.65-4633-01

2

Carefully press catch hooks (arrows) outwards and pull left front center Parktronic sensor (B8/17) or right front center Parktronic sensor (B8/20) out of the guide.

Installation: Convert decoupling ring (1) when replacing left front center PARKTRONIC sensor (B8/17) or right front center PARKTRONIC sensor (B8/20).
Check decoupling ring (1) for damage.

If the decoupling ring (1) is damaged,

replace decoupling ring (1).

3

Install in the reverse order.

Henviste dokumenter