ar5465p0001al

Remove/install Parktronic system (PTS) sensors in front bumper

Type ar · emne 54.65 · version 0100 · 2008-05-14

Gælder for: MODEL 169.0 /3, 245.2 as of 3.6.08 with CODE (220) Parktronic system (PTS) with CODE (235) Active Park Assist MODEL 169.0 /3, 245.2 with CODE (809) Model year 2009 with CODE (220) Parktronic system (PTS) with CODE (235) Active Park Assist

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.65 Parkeringshjælp — Serie 169 (modeller 0**, 3**) · Serie 245 (modeller 2**)

EinPAS 28 Komfort-/førerassistancesystem › 28.15 parkeringsassistent › 28.15.12 Sensor/kontakt/ledningssæt — Serie 169 (modeller 0**, 3**) · Serie 245 (modeller 2**)

AR54.65-P-0001AL

Remove/install Parktronic system (PTS) sensors in front bumper

29.4.08

MODEL 169.0 /3, 245.2 as of 3.6.08
with CODE (220) Parktronic system (PTS)
with CODE (235) Active Park Assist

MODEL 169.0 /3, 245.2
with CODE (809) Model year 2009
with CODE (220) Parktronic system (PTS)
with CODE (235) Active Park Assist

Remove/install Parktronic system (PTS) sensors in front bumper

P54.65-3661-06

Shown on model 169.0

1 Front bumper

2 Electrical connector

3 Bracket

B8/1 Outer left front PTS ultrasonic sensor

B8/2 Center left front PTS ultrasonic sensor

B8/3 Inner left front PTS ultrasonic sensor

B8/4 Inner right front PTS ultrasonic sensor

B8/5 Center right front PTS ultrasonic sensor

B8/6 Outer right front PTS ultrasonic sensor

Remove/install

1

Detach front section of fender liner far enough so that outer left front PTS ultrasonic sensor (B8/1) or outer right front PTS ultrasonic sensor (B8/6) is accessible

If the outer left front PTS ultrasonic sensor (B8/1) or outer right front PTS ultrasonic sensor (B8/6) is to be removed separately.

2

Unclip outer left front PTS ultrasonic sensor (B8/1) or outer right front PTS ultrasonic sensor (B8/6) from bracket (3) and disconnect electrical connector (2)

If the outer left front PTS ultrasonic sensor (B8/1) or outer right front PTS ultrasonic sensor (B8/6) is to be removed separately.

Installation: Ensure that electrical connector (2) is seated properly.

3

Check Parktronic system (PTS) for proper function

If the outer left front PTS ultrasonic sensor (B8/1) or outer right front PTS ultrasonic sensor (B8/6) is to be removed separately.

Switch off ignition, PTS control unit performs self-test automatically

4

Remove front bumper (1).

If the center left front PTS ultrasonic sensor (B8/2), inner left front PTS ultrasonic sensor (B8/3), inner right front PTS ultrasonic sensor (B8/4) or center right front PTS ultrasonic sensor (B8/5) is to be removed.

Model 169.0/3

AR88.20-P-2000AK

Model 245.2

AR88.20-P-2000BK

5

Unclip center left front PTS ultrasonic sensor (B8/2), inner left front PTS ultrasonic sensor (B8/3), inner right front PTS ultrasonic sensor (B8/4) or center right front PTS ultrasonic sensor (B8/5) from bracket (3) and disconnect electrical connector (2)

If the center left front PTS ultrasonic sensor (B8/2), inner left front PTS ultrasonic sensor (B8/3), inner right front PTS ultrasonic sensor (B8/4) or center right front PTS ultrasonic sensor (B8/5) is to be removed.

Installation: Ensure that electrical connector (2) is seated properly.

6

Install in the reverse order

Henviste dokumenter