ar5430s3004p

Remove/install 360° camera control unit

Type ar · emne 54.30 · version 0201 · 2020-06-16

Gælder for: Model 470 with code JS1 (360° camera (SURROUND VIEW))

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.30 Kombi-instrument, indikatorinstrumenter, advarselsanordninger — Serie 470

EinPAS 36 Syn › 36.25 Kamerasystem › 36.25.11 Styreenhed/relæ — Serie 470

AR54.30-S-3004P

Remove/install 360° camera control unit

15.06.2020

Model

470

with code JS1 (360° camera (SURROUND VIEW))

Modification notes

08.11.2018

"Installation information", added.

Operation step 3

Remove/install 360° camera control unit

S54.30-4599-09

1

360° camera control unit

3

Electrical connectors

2

Blower housing

4

Nut

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Connect vehicle diagnosis system, read out basic data of 360° camera control unit (1) and temporarily store.

If the 360° camera control unit (1) is replaced.

AD00.00-S-2000-06P

Installation: Transfer temporarily stored basic data to new 360° Camera control unit (1) and carry out commissioning of 360° Camera control unit (1).

2

Switch off ignition and store transmitter key outside of transmission range (min. 2  m).

3

Remove blower housing (2).

AR83.10-S-0005P

Installation: Reinstall blower housing (2) only after function test of 360° camera control unit (1).

4

Disconnect electrical connection (3).

5

Unscrew nuts (4).

6

Remove 360° camera control unit (1).

7

Install in the reverse order

Check

8

Perform function test of 360° camera system.

Henviste dokumenter