Remove/install rotary light switch

Type ar · emne 54.25 · version 0107 · 2006-11-06

Gælder for: MODEL 375 with BODY 375.810 MODEL 375 with BODY 375.830 MODEL 375 with BODY 375.840 MODEL 944 with BODY 944.899 MODEL 950, 952, 953, 954 with BODY 940.899 MODEL 958 with BODY 958.860 except CODE (XV0) Global cockpit MODEL 958 with BODY 958.870 except CODE (XV0) Global cockpit MODEL 970, 972, 974, 975, 976 with BODY 972.899

Ikke tilgængelig på “da”; vises på Engelsk.

AR54.25-W-3250A

24.10.06

MODEL 375 with BODY 375.810

MODEL 375 with BODY 375.830

MODEL 375 with BODY 375.840

MODEL 944 with BODY 944.899

MODEL 950, 952, 953, 954 with BODY 940.899

MODEL 958 with BODY 958.860 except CODE (XV0) Global cockpit

MODEL 958 with BODY 958.870 except CODE (XV0) Global cockpit

MODEL 970, 972, 974, 975, 976 with BODY 972.899

W68.10-0017-06

Shown on body 972.899

1 Operating knob (light switch)

2 Nut

3 Cover

4 Electrical connector

S24 Light switch

 	Remove/install
1	Switch off ignition
2	Pull off operating knob (1) on light switch (S24)
3	Unscrew nut (2)	 Installation: Tighten nut (2) carefully.
4	Remove cover (3)
5	Remove light switch (S24)	 Installation: Pay attention to the correct seat of the retaining lugs of the light switch.
6	Disconnect electrical connector (4)
7	Install in the reverse order
8	Check light switch (S24) for proper operation