ar5425w2807na

Remove/install multifunction control lever

Type ar · emne 54.25 · version 0101 · 2018-03-12

Gælder for: Model 967

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.25 Kontakter — Serie 967

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.15 netværk/multifunktion › 25.15.18 kontakt/kontaktgruppe/betjeningsfelt — Serie 967

AR54.25-W-2807NA

Remove/install multifunction control lever

26.02.2018

Model

967

Remove/install multifunction control lever

1

Steering column trim

2

Steering column trim

A

Arrow

B

Arrow

W54.25-1206-06

Remove/install multifunction control lever

W54.25-1208-09

3

Bolts

S20

Left multifunction control lever

4

Bolts

S23

Right multifunction control lever

Notes on safety-relevant components

AH00.00-Z-0019-01A

Remove/install

1

Switch off ignition

2

Release steering column trim (1) and set it down in direction of arrow (A)

The steering column trim (1) is engaged in the steering column trim (2).

3

Release steering column trim (2) and set it down in direction of arrow (B)

4

Disconnect electrical connector

5

Remove screws (3) or screws (4)

6

Remove left multifunction control lever (S20) and right multifunction control lever (S23)

Installation: Set the left multifunction control lever (S20) and right multifunction control lever (S23) to the center position.

7

Install in the reverse order

8

Check left multifunction control lever (S20) and right multifunction control lever (S23) for proper operation

Henviste dokumenter