ar5425d3270ts

Remove/install light switch module

Type ar · emne 54.25 · version 0100 · 2018-05-02

Gælder for: Model 907, 910

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.25 Kontakter — Serie 907 · Serie 910

EinPAS 30 Belysningsanlæg › 30.15 Udvendig belysning › 30.15.12 Sensor/kontakt/ledningssæt — Serie 907 · Serie 910

AR54.25-D-3270TS

Remove/install light switch module

20.12.2017

Model

907, 910

Remove/install light switch module

1

Light switch module

4

Electrical connector

D54.25-1130-11

Remove/install light switch module

D54.25-1126-09

Shown with code B25 (electric parking brake)

1

Light switch module

3

Retaining tabs

2

Cover

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Release trim (2) with attached electric lines far enough from the instrument panel to gain access to the retaining tabs (3) and the electrical connector (4) of the light switch module (1)

AR68.10-D-1501TS

2

Disconnect electrical connection (4)

3

Release light switch module (1) at retaining tabs (3) and remove towards rear from trim (2)

4

Install in the reverse order

Check

5

Perform function test of all control elements of light switch module (1)

Henviste dokumenter