ar5425d0001a

Remove/install fuel filler flap solenoid switch

Type ar · emne 54.25 · version 0105 · 2012-02-23

Gælder for: MODELS 902.061 /062, 903.061 /062 /063, 904.062 /063, 902.012 /072, 903.012 /013 /022 /072 /073, 904.012 /013 with ENGINE 111.979 with CODE (MS7) NGT (Natural Gas Transporter) sprinter MODELS 902.661 /662, 903.661 /662 /663, 904.662 /663, 902.612 /672, 903.612 /613 /622 /672 /673, 904.612 /613 with ENGINE 111.984 with CODE (MS7) NGT (Natural Gas Transporter) sprinter

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.25 Kontakter — Serie 902 (modeller 012, 061, 062, 072, 612, 661, 662, 672) · Serie 903 (modeller 012, 013, 022, 061, 062, 063, 072, 073, 612, 613, 622, 661, 662, 663, 672, 673) · Serie 904 (modeller 012, 013, 062, 063, 612, 613, 662, 663)

EinPAS 29 kørselsgodkendelses-/sikringssystem › 29.16 Aflåsning/oplåsning › 29.16.12 Sensor/kontakt/ledningssæt — Serie 902 (modeller 012, 061, 062, 072, 612, 661, 662, 672) · Serie 903 (modeller 012, 013, 022, 061, 062, 063, 072, 073, 612, 613, 622, 661, 662, 663, 672, 673) · Serie 904 (modeller 012, 013, 062, 063, 612, 613, 662, 663)

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.36 Hjelm/klap/dæksel › 35.36.12 Sensor/kontakt/ledningssæt — Serie 902 (modeller 012, 061, 062, 072, 612, 661, 662, 672) · Serie 903 (modeller 012, 013, 022, 061, 062, 063, 072, 073, 612, 613, 622, 661, 662, 663, 672, 673) · Serie 904 (modeller 012, 013, 062, 063, 612, 613, 662, 663)

Gælder også for motorer/gearkasser: 111 979, 111 984

AR54.25-D-0001A

Remove/install fuel filler flap solenoid switch

16.2.12

MODELS 902.061 /062, 903.061 /062 /063, 904.062 /063, 902.012 /072, 903.012 /013 /022 /072 /073, 904.012 /013 with ENGINE 111.979 with CODE (MS7) NGT (Natural Gas Transporter) sprinter

MODELS 902.661 /662, 903.661 /662 /663, 904.662 /663, 902.612 /672, 903.612 /613 /622 /672 /673, 904.612 /613 with ENGINE 111.984 with CODE (MS7) NGT (Natural Gas Transporter) sprinter

Remove/install fuel filler flap solenoid switch

D54.25-0003-09

Illustration shows Sprinter prior to 2/2000

Components by analogy for Sprinter as of 2/2000

1 Fixture of solenoid switch

2 Cross-head screw

3 Solenoid switch

7 Fuel filler flap

8 Cap

4 Cap

5 Permanent magnet

6 Fixture of permanent magnet

Remove/Install

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect ground lead from battery

Notes on battery

All models

AH54.10-P-0001-01A

2

Open fuel filler flap (7)

3

Lever off caps (4, 8)

4

Take solenoid switch (3) and permanent magnet (5) out of the fixtures (1, 6)

5

Pry paneling off the left front B-pillar

6

Separate plug connection of solenoid switch (3) and pull cable out of the hole to the outside together with grommet

7

Install in the reverse order

Henviste dokumenter