ar5421s0014p

Programming of control units

Type ar · emne 54.21 · version 0200 · 2018-11-13

Gælder for: Model 470, 471

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.21 Styreenheder / moduler — Serie 470 · Serie 471

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.15 netværk/multifunktion › 25.15.20 Indkodning/parameterindstilling — Serie 470 · Serie 471

AR54.21-S-0014P

Programming of control units

31.10.2018

Model

470, 471

Modification notes

29.10.2018

Connect/disconnect charger added.

Operation step 1, 9

Notes on programming control units

AH54.21-P-0001-03Z

Program with Flash Support File (support through User Help Desk)

1

Connect charging equipment.

AR54.10-S-1127P

2

Connect vehicle diagnosis system, start XENTRY Diagnostics (XD) and select vehicle model.

AD00.00-S-2000-06P


Sufficient power supply to the vehicle on-board electrical system must be ensured throughout the entire work procedure.
Otherwise any undervoltage that occurs may damage the control units.

3

Program corresponding control unit.

See process description in XD "INFO information system".

4

Perform redocumentation in Vehicle Documentation (VeDoc) in VeDoc screen.

Only after successful programming of the control unit.

5

Perform SCN coding for the respective control unit.

Only when required, refer to XD.

AR54.21-S-0015P

6

Perform teach-in processes.

Only when required, refer to XD.

7

Read out and delete fault memory.

8

Disconnect diagnostic system.

AD00.00-S-2000-06P

9

Disconnect charger.

AR54.10-S-1127P

Henviste dokumenter