Parameterization of control units through online/offline process

Type ar · emne 54.21 · version 0102 · 2020-03-12

Gælder for: Model 368 Carry out the teach-in of the control unit using "Xentry Flash" Model 693, 694, 695, 958.0/1, 979 Carry out the teach-in of the control unit using "Xentry Flash"

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.21 Styreenheder / moduler — Serie 368 · Serie 693 · Serie 694 · Serie 695 · Serie 958 (modeller 0**, 1**) · Serie 979

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.15 netværk/multifunktion › 25.15.20 Indkodning/parameterindstilling — Serie 368 · Serie 693 · Serie 694 · Serie 695 · Serie 958 (modeller 0**, 1**) · Serie 979

AR54.21-B-0420A

Parameterization of control units through online/offline process

10.03.2020

Model	368
	Carry out the teach-in of the control unit using "Xentry Flash"
Model	693, 694, 695, 958.0/1, 979
	Carry out the teach-in of the control unit using "Xentry Flash"

	Carry out the teach-in of the control unit using "Xentry Flash"
1	Log into Star Diagnosis
2	Select "Xentry Flash"
3	Identify the vehicle and start DAS
4	Access "Special functions"
5	Access "Parameterization of control units"
6	Access "On-line (Star Diagnosis equipment connected)"	 Only when Star Diagnosis has network communication.
7	Select the desired control unit for parametrization
8	Follow instructions on the screen