Disconnect electric cables at battery, connect.

AR54.18-T-0002BA

Disconnect electric cables at battery, connect.

16.2.12



Disconnecting

 Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Switch off ignition

2

Open left rear service flap

3

Set on-board power supply isolating switch (1) to "0"

4

Remove battery tray locking pin (2) and pull out batteries with battery tray

5

Disconnect battery terminals

 Ensure that no accidental contact can occur between the battery terminals.



Notes on battery

All models

AH54.10-P-0001-01A



Inspect

6

Check all electrical contacts for damage

 Replace parts or batteries if necessary.



Connecting

7

Connect battery terminals

 Ensure that no accidental contact can occur between the battery terminals.

8

Push in batteries with battery tray and lock

9

Set on-board power supply isolating switch (1) to "1"

10

Set tachograph, clock and radio

 See Operating Instructions