ar5418g001002dd

Change crimping set and positioner at the crimper

Type ar · emne 54.18 · version 0100 · 2016-11-25

Gælder for: Model 000.001

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.18 Ledningssæt — Serie 000 (modeller 001)

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.25 Hovedledningssæt › 25.25.40 Tilslutningsdel — Serie 000 (modeller 001)

AR54.18-G-0010-02DD

Change crimping set and positioner at the crimper

Model

000.001

Change crimping set and positioner at the crimper
Change crimping set and positioner at the crimper

930 589 00 99 00

Supplemental truck wiring harness repair kit

000 589 13 99 00

Wiring harness repair kit, basic

Change crimping set and positioner at the crimper

  Change crimping dies (3, 4)

1

 Close crimper (2) and remove screws/bolts (1) completely.



2

 Press crimper (2) all the way until it opens automatically and remove the  crimping dies (3, 4).


W54.18-1040-11

Change crimping set and positioner at the crimper

3

Insert corresponding  crimping dies (3, 4) into the open  crimper (2).


The marks (arrows) on the  crimping dies (3, 4) must align with the marks (arrows) on the  crimper (2).



4

Close  crimper (2) and tighten  crimping dies (3, 4).


W54.18-1041-03

Change crimping set and positioner at the crimper

  Change positioner (5)

5

Pull off  positioner (5) from bracket (6) and change.


The magnet (7) of  positioner (5) must point downward.


W54.18-1042-11