ar5418d7435tsf

Remove/install electrical wiring harness for front brakepad wear display

Type ar · emne 54.18 · version 0100 · 2018-05-12

Gælder for: Model 910

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.18 Ledningssæt — Serie 910

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.12 Sensor/kontakt/ledningssæt — Serie 910

AR54.18-D-7435TSF

Remove/install electrical wiring harness for front brakepad wear display

27.04.2018

Model

910

Remove/install electrical wiring harness for front brakepad wear display

D54.18-1251-79

1

Electrical wiring harness

5

Cover

2

Screw

6

Bracket

3

Electrical connector

7

Electrical connectors

4

Nut

Topical note

Notes on repairs to brake system

AH42.00-P-0003-01A

Remove/install

1

Remove right front wheel.

AR40.10-D-1100TS

2

Remove screw (2) and remove electrical wiring harness (1) until electrical connector (3) is accessible.

Bolt, wiring harness for wear indicator to brake caliper

*BA42.10-N-1003-10TS

3

Disconnect electrical connector (3).

4

Open dust cap (arrow A) and loosen electrical wiring harness (1) from brake caliper.

5

Unclip electrical wiring harness (1) from holders (arrows B).

6

Unscrew nut (4).

7

Loosen trim (5) and fold back until electrical connectors (7) are accessible.

8

Disconnect electrical connectors (7).

9

Unclip holder (6) using a suitable tool and remove until the lock (arrow C) is accessible.

10

Release electrical wiring harness (1) (arrow C) and remove from holder (6).

11

Install in the reverse order

Front axle brake caliper

Number

Designation

Model 907, 910

BA42.10-N-1003-10TS

Bolt, wiring harness for wear indicator to brake caliper

Nm

8

Henviste dokumenter