ar5410w0042a

Remove/install cab EMERGENCY OFF switch

Type ar · emne 54.10 · version 0102 · 2012-02-22

Gælder for: MODEL 950, 952, 953, 954 with BODY 942.899 with CODE (E06) Electrical system for hazardous goods vehicles (GGVS)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.10 Batteri, spændingsforsyning, spændingstransformer — Serie 942 (modeller 899) · Serie 950 · Serie 952 · Serie 953 · Serie 954

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.20 Køretøjets ledningsnet › 25.20.12 Sensor/kontakt/ledningssæt — Serie 942 (modeller 899) · Serie 950 · Serie 952 · Serie 953 · Serie 954

AR54.10-W-0042A

Remove/install cab EMERGENCY OFF switch

15.2.12

MODEL 950, 952, 953, 954 with BODY 942.899 with CODE (E06) Electrical system for hazardous goods vehicles (GGVS)

Remove/install cab EMERGENCY OFF switch

W54.10-0018-06

3 Switch cover

S5 Cab EMERGENCY OFF switch

Remove/install cab EMERGENCY OFF switch

W68.10-0004-09

1 Air nozzles

2 Upper part of covering

3 Switch cover

4 Securing bolts

Remove/install

1

Switch off ignition

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

2

Disconnect ground lead from battery

Notes on battery

AH54.10-P-0001-01A

3

Remove switch panel (3)

4

Unscrew switch panel mounting bolts (4)

Installation: Screw in mounting bolts (4) carefully.

5

Fold out switch panel

6

Disconnect connector (S5 X1) on cab EMERGENCY OFF switch (S5)

7

Remove cab EMERGENCY OFF switch (S5)

8

Install in the reverse order

9

Perform function test on electrical system

10

Set time on tachograph

Henviste dokumenter