ar5410s0039e

Remove battery disconnect switch

Type ar · emne 54.10 · version 0101 · 2015-08-28

Gælder for: Model 447 with code ED6 (Taximeter in rear-view mirror) with code Z65 (Packing for sea transport)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.10 Batteri, spændingsforsyning, spændingstransformer — Serie 447

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.20 Køretøjets ledningsnet › 25.20.12 Sensor/kontakt/ledningssæt — Serie 447

AR54.10-S-0039E

Remove battery disconnect switch

27.8.15

Model

447

with code ED6 (Taximeter in rear-view mirror)

with code Z65 (Packing for sea transport)

Remove battery disconnect switch

S54.10-4657-09

Shown on MODEL 447.8

1

Cover (MODEL 447.8)

3

Key

2

Battery disconnect switch

4

Bag

Remove battery disconnect switch
Remove battery disconnect switch
Remove battery disconnect switch

S54.10-4658-01

S54.10-4659-71

S54.10-4660-01

5

Ground line (battery disconnect switch)

6

Clamping bolt

7

Ground line (vehicle)

B95

Battery sensor

G1

On-board electrical system battery

Danger !

Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries

No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

Notes on battery

AH54.10-P-0001-01A

Remove

1.1

Unclip cover (1) at outside on front passenger seat console from above and take off

MODEL 447.8

Long wedge

*115589035900

1.2

Remove cover at outside on front passenger seat console

MODEL 447.6/7

2

Remove wiring harness with battery disconnect switch (2) and bag (4) from seat console


Do not pull on the ground line (vehicle) (7).
This prevents damage to battery sensor (B95).

3

Switch off battery disconnect switch (2) and remove key (3)

4

Open cable tie on bag (4) and remove bag (4)

5

Disconnect ground line (5) from on-board electrical system battery (G1)

6

Loosen clamp screw (6) on ground line (5) and remove ground line (5)

7

Connect ground line (7) to on-board electrical system battery (G1)


Do not pull on the ground line (7).
This prevents damage to battery sensor (B95).

Bolt, ground line to negative terminal for on-board electrical system battery/additional battery

*BA54.10-N-1001-01F

8

Set time

See operator's manual.

9

Install cover (1) on passenger-side seat console

Battery

Number

Designation

Model 447, 448

BA54.10-N-1001-01F

Bolt, ground line to negative terminal for on-board electrical system battery/additional battery

Nm

5

Remove battery disconnect switch

115 589 03 59 00

Long wedge

Henviste dokumenter