ar5410s0007e

Remove/install additional battery

Type ar · emne 54.10 · version 0105 · 2019-11-23

Gælder for: Model 447 with code E28 (Additional battery for retrofitted consumers) Model 447 with code EE8 (Battery 12V 100 Ah)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.10 Batteri, spændingsforsyning, spændingstransformer — Serie 447

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.20 Køretøjets ledningsnet › 25.20.20 Batteri — Serie 447

AR54.10-S-0007E

Remove/install additional battery

22.11.2019

Model

447

with code E28 (Additional battery for retrofitted consumers)

Model

447

with code EE8 (Battery 12V 100 Ah)

Remove/install additional battery

Shown on model 447 with code E28 (Additional battery for retrofitted consumers)

1

Ground cable

2

Bolts

3

Bracket

7

Vent hose

G1/1

Additional battery

S54.10-4617-11

Remove/install additional battery

Shown on model 447 with code EE8 (Battery 12V 100 Ah)

1

Ground cable

2

Bolts

3

Bracket

4

Nut

5

Ground cable

6

Carrier plate

G1/1

Additional battery

S54.10-4672-06

Danger

Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC.

No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

Topical note

Notes on battery

AH54.10-P-0001-01A

Remove/install

1

Disconnect ground line (1) of additional battery (G1/1)

AR54.10-S-0004E

2

Remove screws (2)

3

Remove bracket (3)

4

Detach vent hose (7) from additional battery (G1/1)

Model 447
with code E28 (Additional battery for retrofitted consumers)

Installation:
Check that the vent hose (7) is correctly seated.
Otherwise escaping battery acid mist can cause damage to the vehicle.

5

Place carrier plate (6) to one side so that additional battery (G1/1) can be pulled out of seat base

Model 447.7/8
with code EE8 (Battery 12V 100 Ah)

6

Pull additional battery (G1/1) out of seat base until positive terminal is accessible

7

Remove positive terminal cover

8

Disconnect positive line from additional battery (G1/1)

Bolt, positive line to positive terminal of on-board electrical system battery/additional battery

*BA54.10-N-1002-01F

9

Remove additional battery (G1/1) from seat base

10

Detach ground line (1) from negative terminal of additional battery (G1/1)

Model 447
with code E28 (Additional battery for retrofitted consumers)
with code SB5 (Luxury driver's seat, pivoting)
Model 447
with code EE8 (Battery 12V 100 Ah)
with code SB5 (Luxury driver's seat, pivoting)
When replacing additional battery (G1/1).

Bolt, ground line to negative terminal for on-board electrical system battery/additional battery

*BA54.10-N-1001-01F

11

Install in the reverse order

Battery

Number

Designation

Model 447, 448

BA54.10-N-1001-01F

Bolt, ground line to negative terminal for on-board electrical system battery/additional battery

Nm

5

Battery

Number

Designation

Model 447, 448

BA54.10-N-1002-01F

Bolt, positive line to positive terminal of on-board electrical system battery/additional battery

Nm

5

Henviste dokumenter