ar5410s0002p

Remove/install battery sensor

Type ar · emne 54.10 · version 0201 · 2020-01-10

Gælder for: Model 470, 471 with engine 642, 699

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.10 Batteri, spændingsforsyning, spændingstransformer — Serie 470 · Serie 471

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.20 Køretøjets ledningsnet › 25.20.12 Sensor/kontakt/ledningssæt — Serie 470 · Serie 471

Gælder også for motorer/gearkasser: 642 ***, 699 ***

AR54.10-S-0002P

Remove/install battery sensor

09.01.2020

Model

470, 471 with engine 642, 699

Modification notes

19.12.2018

Work procedure completely revised.

Remove/install battery sensor

Shown on model 470 with engine 699

1

Nut

2

Ground cable

3

Negative terminal

4

Electrical connector

B95

Battery sensor

S54.10-4691-06

Remove/install battery sensor

Shown on model 470 with engine 642

2

Ground cable

4

Electrical connector

5

Battery sensor

6

Mounting clip

7

Screw

S54.10-A053-76

Danger

Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC.

No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on battery

AH54.10-P-0001-01A

Remove/install

1

Detach ground line of on-board electrical system battery.

AR54.10-S-0003P

2

Disconnect electrical connector (4).

3

Unscrew nut (1).

Model 470, 471 with engine 699

Nut, battery sensor to battery negative terminal

*BA54.10-N-1006-01P

4.1

Remove battery sensor (B95) together with ground line (2) from negative terminal (3).

Model 470, 471 with engine 699

4.2

Unclip retaining clip (6) using a suitable tool.

Model 470, 471 with engine 642


Carefully unclip retaining clip (6).
If damaged, the retaining clip (6) cannot be replaced individually.

5.1

Remove battery sensor (B95) from ground line (2).

Model 470, 471 with engine 699

5.2

Remove bolt (7) and battery sensor (5) with the ground line (2).

Model 470, 471 with engine 642

The battery sensor (5) and the ground line (2) are welded together, and can only be replaced together.

6

Install in the reverse order

Battery, voltage supply

Number

Designation

Model 471

Model 470

BA54.10-N-1006-01P

Nut, battery sensor to battery negative terminal

Nm

13

13

Henviste dokumenter