ar5410p0005v

Remove/install battery

Type ar · emne 54.10 · version 0102 · 2012-02-22

Gælder for: MODEL 171.4

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.10 Batteri, spændingsforsyning, spændingstransformer — Serie 171 (modeller 4**)

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.20 Køretøjets ledningsnet › 25.20.20 Batteri — Serie 171 (modeller 4**)

AR54.10-P-0005V

Remove/install battery

15.2.12

MODEL 171.4

Remove/install battery

P54.10-2377-09

3 Ground cable

4 Cover for positive terminal

5 Positive line

10 Bracket

11 Supporting bracket

G1 Battery

6 Venting hose

7 Nut

8 Retaining clip

9 Nut

Remove/install

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

Notes on battery

AH54.10-P-0001-01A

1

Disconnect ground line (3) from the battery (G1)

AR54.10-P-0003V

2

Remove positive terminal cover (4)

3

Disconnect positive line (5) from battery (G1)

Installation: Ensure that the positive line (5) is firmly seated, otherwise the positive terminal may be damaged.

4

Pull vent hose (6) off the battery (G1)

Installation: Pay attention to routing of the vent hose (6) without kinks.

5

Unscrew nut (7) and remove the retaining bracket (8)

6

Unscrew nut (9) and remove bracket (10)

7

Remove battery (G1) from the engine compartment

Use supporting bracket (11).

8

Install in the reverse order

9

Perform basic programming

AR00.19-P-0200V

Henviste dokumenter