ar5410p0005ff

Removing and installing battery

Type ar · emne 54.10 · version 0102 · 2012-02-22

Gælder for: MODEL 454.0

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.10 Batteri, spændingsforsyning, spændingstransformer — Serie 454 (modeller 0**)

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.20 Køretøjets ledningsnet › 25.20.20 Batteri — Serie 454 (modeller 0**)

AR54.10-P-0005FF

Removing and installing battery

15.2.12

MODEL 454.0

Removing and installing battery

P54.10-2371-04

Shown on vehicle with

Engine 135.950

1 Cover

2 Positive cable

3 Screw

4 Bracket

G1 Battery

Remove/Install

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

Notes on battery

AH54.10-P-0001-01A

1

Disconnect ground cable

AR54.10-P-0003FF

2

Raise cover (1)

3

Disconnect positive cable (2)

4

Unscrew bolt (3).

5

Remove holder (4)

6

Remove battery (G1)

7

Install in the reverse order

Henviste dokumenter