ar5410d0007a

Removing, installing auxiliary battery

Type ar · emne 54.10 · version 0102 · 2012-02-22

Gælder for: MODEL 903.662 with CODE (ZU8) National version for USA with CODE (Z29) "James Cook" touring camper, NAFTA

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.10 Batteri, spændingsforsyning, spændingstransformer — Serie 903 (modeller 662)

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.20 Køretøjets ledningsnet › 25.20.20 Batteri — Serie 903 (modeller 662)

AR54.10-D-0007A

Removing, installing auxiliary battery

15.2.12

MODEL 903.662
with CODE (ZU8) National version for USA
with CODE (Z29) "James Cook" touring camper, NAFTA

Removing, installing auxiliary battery

D54.10-1109-08

1 Seat belts

2 Bench seat

3 Padding

4 Cover

Removing, installing auxiliary battery

D54.10-1112-08

5 Plug

6 Bolts

7 Bolts

8 Cover

12 Bolts

13 Bracket

14 Batteries

9 Clutch

10 Ground cables

11 Positive leads

Remove/Install

Danger!

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.

Deburr repair panels.

AS00.00-Z-0017-01B

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

Notes on battery

All models

AH54.10-P-0001-01A

1

Unlock seat belts (1) from the seat belt buckles

2

Move the bench seat (2) forwards

3

Remove upholstery (3)

4

Fold out cover (4)

5

Take out plug (5)

6

Remove bolts (6)

7

Loosen bolts (7)

8

Move cover (8) to the right and take out

9

Detach coupling (9) of temperature sensor

10

Disconnect ground lines (10)

11

Disconnect positive leads (11)

12

Remove bolts (12)

13

Take out bracket (13)

14

Take out batteries (14)

15

Install in the reverse order

16

Check voltage of the batteries (14) via the electrical center

Henviste dokumenter