ar5410b0003a

Disconnect/connect battery ground line

Type ar · emne 54.10 · version 0202 · 2020-02-06

Gælder for: Model 368, 384 Model 382.1 except code MS6 (Euro VI) Model 634, 688

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.10 Batteri, spændingsforsyning, spændingstransformer — Serie 368 · Serie 382 (modeller 1**) · Serie 384 · Serie 634 · Serie 688

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.20 Køretøjets ledningsnet › 25.20.12 Sensor/kontakt/ledningssæt — Serie 368 · Serie 382 (modeller 1**) · Serie 384 · Serie 634 · Serie 688

AR54.10-B-0003A

Disconnect/connect battery ground line

20.01.2020

Model

368, 384

Model

382.1

except code MS6 (Euro VI)

Model

634, 688

Disconnect/connect battery ground line

Battery case represented in model 384.06

1

Ground lead

2

Master switch

B54.10-0016-06

Remove/install

Danger

Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC.

No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

Topical note

Notes on battery

AH54.10-P-0001-01A

1

Turn off all electrical consumers

2

Remove key from the ignition

3

Remove the battery box cover

4.1

Switch off the master switch (2)

with CODE E37

Only vehicles equipped with CODE E37: battery master switch. The master switch is connected to the battery positive terminal. Never remove the positive cable before removing the mass cable (1).

4.2

Slacken the screw of the negative post terminal and remove ground lead (1) from the battery

without code E37

Always remove the ground cable (1) before removing the positive cable.

5

Install in reverse order

6

Encode the radio

See the service manual.

7

Adjust the time on the instrument panel (INS)

Only when the time is not automatically updated.

8

Synchronize the time between the tachograph disc and visor

See the service manual.

Henviste dokumenter