ar4920g2042ch

Install test connection at inlet for compressed air of metering device

Type ar · emne 49.20 · version 0101 · 2018-08-11

Gælder for: Engine 457.9, 458.9 in model 000.001 with BlueTec

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 49 Udstødningssystem, udstødningsrensning › 49.20 Udstødningsefterbehandling — Serie 000 (modeller 001)

EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.51 pumpe/doseringsenhed/dyse — Serie 000 (modeller 001)

Gælder også for motorer/gearkasser: 457 9**, 458 9**

AR49.20-G-2042CH

Install test connection at inlet for compressed air of metering device

10.08.2018

Engine

457.9, 458.9 in model 000.001

with BlueTec

Install test connection at inlet for compressed air of metering device

1

Test connection (M12x1,5)

2

Fitting (M12x1,5/M10x1)

3

Compressed-air inlet

4

Metering device

5

Compressed-air line

W14.40-1386-06

Note on calculation of tightening torque when using insertion or socket tools with various effective lengths

AH00.00-P-0015-01CW

Install

1

Remove banjo bolt from compressed air inlet (3) of the metering device (4).

2

Screw compressed-air line (5) with the fitting (2) onto the compressed air inlet (3).

Install new sealing rings.

Fitting on metering device

*BA14.40-N-1037-02H

3

Attach test connection (1) to fitting (2).

The test connection can remain installed afterward.

Test connection on fitting

*BA14.40-N-1038-02H

Exhaust aftertreatment, Blue Tec

Number

Designation

Engine 457.9, 458.9

BA14.40-N-1037-02H

Fitting on metering device

Nm

15

Exhaust aftertreatment, Blue Tec

Number

Designation

Engine 457.9, 458.9

BA14.40-N-1038-02H

Test connection on fitting

Nm

10

Henviste dokumenter