ar4920g1070ch

Remove/install AdBlue(R) pressure sensor

Type ar · emne 49.20 · version 0101 · 2018-08-11

Gælder for: Engine 457.9, 458.9 in model 000.001 with BlueTec

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 49 Udstødningssystem, udstødningsrensning › 49.20 Udstødningsefterbehandling — Serie 000 (modeller 001)

EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.12 Sensor/kontakt/ledningssæt — Serie 000 (modeller 001)

Gælder også for motorer/gearkasser: 457 9**, 458 9**

AR49.20-G-1070CH

Remove/install AdBlue(R) pressure sensor

10.08.2018

Engine

457.9, 458.9 in model 000.001

with BlueTec

Remove/install AdBlue(R) pressure sensor

G49.20-3214-08

1

Metering device

3

Electrical connector

2

Sealing ring

4

AdBlue® pressure sensor

Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

Note on calculation of tightening torque when using insertion or socket tools with various effective lengths

AH00.00-P-0015-01CW

Notes on use, material properties and handling of AdBlue®

AH14.40-N-0001-01A

Remove/install

1

Switch off ignition.

2

Disconnect electrical connector (3) from AdBlue® pressure sensor (4).

3

Remove AdBlue® pressure sensor (4).

AdBlue® SCR pressure sensor to metering device

*BA14.40-N-1006-02H

4

Install in the reverse order.

Exhaust aftertreatment, Blue Tec

Number

Designation

Engine 457.9, 458.9

BA14.40-N-1006-02H

AdBlue® SCR pressure sensor to metering device

Nm

30

Henviste dokumenter