Perform teach-in processes on exhaust gas aftertreatment control unit (ACM)

AR49.20-B-3001EVI

Perform teach-in processes on exhaust gas aftertreatment control unit (ACM)

20.08.2018

Engine

936.9 in model 382.155/189

with code MS6 (Euro VI)

Program

1

Turn on the ignition

2

Connect the diagnosis system and start the XENTRY


If one of the following components is replaced, the exhaust gas after-treatment control unit (ACM) must be run in different procedures of re-programming:
Exhaust gas after-treatment unit
Diesel particulate filter (DPF)

3

From the list, select and start the corresponding re-programming procedure


The re-programming procedures are fully performed by the menu:
Exhaust gas after-treatment control unit (ACM) 
Adaptation 
Re-programming procedure 
Re-programming of new components

4

Finish the XENTRY and disconnect the diagnosis system