ar4910w4801d

Remove/install muffler

Type ar · emne 49.10 · version 0100 · 2008-04-16

Gælder for: ENGINES 457.9 in MODEL 940, 942, 943, 944 with CODE (MS4) BlueTec 4 except CODE (K68) Vertical exhaust muffler(s) behind cab ENGINES 457.9 in MODEL 940, 942, 943, 944 with CODE (MS5) BlueTec 5 except CODE (K68) Vertical exhaust muffler(s) behind cab

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 49 Udstødningssystem, udstødningsrensning › 49.10 Udstødningsrør, katalysator, lyddæmper — Serie 940 · Serie 942 · Serie 943 · Serie 944

EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.41 manifold/rør/lyddæmper/udstødningsslange — Serie 940 · Serie 942 · Serie 943 · Serie 944

Gælder også for motorer/gearkasser: 457 9**

AR49.10-W-4801D

Remove/install muffler

14.4.08

ENGINES 457.9 in MODEL 940, 942, 943, 944
with CODE (MS4) BlueTec 4
except CODE (K68) Vertical exhaust muffler(s) behind cab

ENGINES 457.9 in MODEL 940, 942, 943, 944
with CODE (MS5) BlueTec 5
except CODE (K68) Vertical exhaust muffler(s) behind cab

Remove/install muffler

W14.40-1188-08

1 Exhaust pipe

2 Front fender section

3 Muffler (with reduction catalytic converter)

7 Vehicle jack

8 Strut

4 Line (vent pressure regulator)

5 Electrical connector

6 Electrical connector

Remove/install

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

1

Switch off ignition

2

Open maintenance flap

Danger!

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut.

AS60.80-Z-0001-01A

3

Tilt cab

Notes on tilting the cab

AH60.80-N-0003-01A

4

Detach front fender section (2) at muffler (3)

5

Remove exhaust pipe (1)

*BA49.10-N-1001-01K

*BA49.10-N-1003-01K

6

Support muffler (3) with vehicle jack (7)

Use suitable base between muffler (3) and vehicle jack (7).

7

Remove strut (8)

*BA49.10-N-1011-01K

*BA49.10-N-1012-01K

8

Remove temperature sensor at inlet to reduction catalytic converter

Only when installing new muffler (3).

AR14.40-W-2011B

9

Remove temperature sensor at outlet to reduction catalytic converter

Only when installing new muffler (3).

AR14.40-W-2012B

10

Disconnect electrical connectors (5, 6)

11

Detach line (4) at muffler (3)

12

Detach muffler (3) from longitudinal member

*BA49.10-N-1010-01K

13

Install in the reverse order

Exhaust system

Number

Designation

Engine
457.9

BA49.10-N-1001-01K

Bolt connecting clamps to front muffler, exhaust pipe, muffler and exhaust flex pipe

Nm

50

BA49.10-N-1003-01K

Bolt connecting exhaust pipe clamps to engine brake flap fitting

Nm

15

BA49.10-N-1010-01K

Bolt, muffler console to longitudinal member

Nm

51

BA49.10-N-1011-01K

Brace, muffler to muffler

Nm

150

BA49.10-N-1012-01K

Brace, muffler to crossmember

Nm

150

Henviste dokumenter