ar4910t714002b

Removing rear section of exhaust system

Type ar · emne 49.10 · version 0100 · 2005-07-12

Gælder for: ENGINE 441.980 in MODEL 613.355 ENGINE 402.970, 446.938 in MODEL 613.455 /485

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 49 Udstødningssystem, udstødningsrensning › 49.10 Udstødningsrør, katalysator, lyddæmper — Serie 441 (modeller 980) · Serie 613 (modeller 355, 455, 485)

EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.41 manifold/rør/lyddæmper/udstødningsslange — Serie 441 (modeller 980) · Serie 613 (modeller 355, 455, 485)

Gælder også for motorer/gearkasser: 402 970, 446 938

AR49.10-T-7140-02B

Removing rear section of exhaust system

Danger!

Risk of injury to skin and eyes from handling hot or glowing objects.

Wear protective gloves, protective clothing and, if appropriate, eye protection.

AS00.00-Z-0002-01A

Exhaust system

Number

Designation

Engine 402.970, 446.938

Engine 441.980

BA49.10-N-1001-01F

Clamp of flexible exhaust pipe to exhaust silencer

Nm

43

43

Removing rear section of exhaust system

T49.10-0004-06

1 Open rear right hand engine compartment flap (1).

2 Remove tailpipes (3) from muffler (2).

The tailpipes are each fixed with a clamp.

Installation: Ensure that the tailpipes are aligned centrally in the bumper cladding.

3 Remove flexible exhaust pipes (4) from muffler (2) .

The flexible exhaust pipes are fixed to the muffler with clamps (5).

4 Unhook the rubber mount (6) from the muffler (2) and remove the muffler.

If the muffler is renewed, the holder for the rubber mount must be taken off the removed muffler.

Henviste dokumenter