S49.10-A004-79
1 | Nuts | 4 | Elastomer bearing | 6 | Bolts | ||
2 | Bracket | 5 | Seal | 7 | Marking | ||
3 | Rear muffler |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Raise vehicle. | ||
Topical note | Special instructions for lifting and supporting vehicle | ||
2 | Remove nuts (1). | Nut, rear muffler to exhaust gas aftertreatment unit | |
3 | Remove holder (2). | ||
4 | Remove rear muffler (3). | To do this, remove rear muffler (3) from the elastomer bearings (4). | |
Installation: Install new seal (5). | |||
| Check | ||
5 | Check elastomer bearings (4) for wear and damage. | If damage is present: | |
| |||
replace affected elastomer bearing (4). | |||
When replacing: | |||
Installation: The markings (7) must point in the direction of travel. | |||
Bolt, bracket for elastomer bearing for rear muffler to body | |||
6 | Install in the reverse order. | ||
| Check | ||
7 | Check installation position and check for unobstructed movement of the rear muffler (3). | If installation position of rear muffler (3) or unobstructed movement is not correct, | |
| |||
Correct installation position of the rear muffler (3). | |||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
8 | Check exhaust system for leaks with the engine running. | Visual inspection only. |
Henviste dokumenter
- ah0000p500001a Oplysninger om forebyggelse af skader på grund af snavs og fremmedlegemer
- ah0060n010001p Bemærkning til hævning og opklodsning
- ar0060s100004p
- as0000z000201a Fare for personskade på hud og øjne ved håndtering af varme eller glødende genstande
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører
- as0000z001001a Livsfare, hvis køretøjet glider ned fra eller tipper på liften.
- as0000z001701a Fare for personskade på grund af snitsår eller hudafskrabninger grundet skarpkantede køretøjsdele
- as4900z000101a Forbrændings-, kvælnings- og forgiftningsfare ved arbejde på udstødningssystemet og dermed forbundne komponenter. Kvælningsfare og fare for forgiftning ved indånding af gasformede og faste komponenter i forbrændingsgassen. Fare for