ar4910p7280ty

Remove / install exhaust system from flange connection

Type ar · emne 49.10 · version 0108 · 2011-10-26

Gælder for: ENGINES 113.967 in MODEL 219.375 ENGINES 113.990 in MODEL 219.376 ENGINES 156.983 in MODEL 219.377

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 49 Udstødningssystem, udstødningsrensning › 49.10 Udstødningsrør, katalysator, lyddæmper — Serie 156 (modeller 983) · Serie 219 (modeller 375, 376, 377)

EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.41 manifold/rør/lyddæmper/udstødningsslange — Serie 156 (modeller 983) · Serie 219 (modeller 375, 376, 377)

Gælder også for motorer/gearkasser: 113 967, 113 990

AR49.10-P-7280TY

Remove / install exhaust system from flange connection

17.10.11

ENGINES 113.967 in MODEL 219.375

ENGINES 113.990 in MODEL 219.376

ENGINES 156.983 in MODEL 219.377

Remove / install exhaust system from flange connection

P49.10-2496-06

1 Center muffler

2 Right catalytic converter

3 Left catalytic converter

4 Screw/bolt

5 Screw/bolt

6 Seal

7 Seal

8 Exhaust system

9 Exhaust rubber mount

10 Retaining clip

Remove/install

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Danger!

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.

Deburr repair panels.

AS00.00-Z-0017-01A

Notes on self-locking nuts and bolts

All models

AH00.00-N-0001-01A

Danger!

Risk of death caused by vehicle slipping or toppling off of the vehicle lift.

Align vehicle between vehicle lift columns and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

1

Raise vehicle

AR00.60-P-1000TX

2

Remove center muffler (1) from right catalytic converter (2) and left catalytic converter (3) by unscrewing bolt (4, 5)

Installation: Clean connecting points free of combustion and corrosion residues. Replace seal (6, 7) and bolt (4, 5).

*BA49.10-P-1002-01R

3

Support exhaust system (8) with transmission jack and transmission plate

Transmission jack
gotis://H_00.10_01.0

Transmission platform for passenger cars and commercial vehicles

gotis://A_25/35/49_02.0

4

Unhook exhaust system (8) from exhaust rubber mounts (9)

For easier disassembly: spread lubricant on retaining bracket (10) and bores of exhaust rubber mounts (9).

Check exhaust rubber mounts (9) for wear and damage; replace if required

Lubricant paste

*BR00.45-Z-1002-06A

5

Lower and remove the exhaust system (8)

6

Install in the reverse order

Checking

7

Check installation position and unobstructed movement of exhaust system (8)

The exhaust system (8) must be mounted free of tension; align exhaust system (8) if required.

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

8

Conduct engine test run and inspect exhaust system (8) for leaks

Exhaust system

Number

Designation

Engine
113
in model
219

Engine
156
in model
219

BA49.10-P-1002-01R

Bolt, catalytic converter to center muffler

Nm

20

20

Repair materials

Number

Designation

Order number

BR00.45-Z-1002-06A

Antifriction paste, rubber parts 2.5 kg, DB supply specification 6867.00

A 000 989 01 60

Henviste dokumenter