ar4910p7000mp

Removing and installing exhaust system complete

Type ar · emne 49.10 · version 0108 · 2006-07-25

Gælder for: ENGINE 113.960 in MODEL 220.875

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 49 Udstødningssystem, udstødningsrensning › 49.10 Udstødningsrør, katalysator, lyddæmper — Serie 220 (modeller 875)

EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.41 manifold/rør/lyddæmper/udstødningsslange — Serie 220 (modeller 875)

Gælder også for motorer/gearkasser: 113 960

AR49.10-P-7000MP

Removing and installing exhaust system complete

17.11.05

ENGINE 113.960 in MODEL 220.875

Removing and installing exhaust system complete

P49.10-2174-09

9/1 Rubber bushing

9/2 Rubber bushing

9/3 Rubber bushing

9/4 Rubber bushing

11/5 Bolts

35 Cross strut

Y93 Exhaust flap switchover valve

11/1 Bolts

11/2 Copper nuts

11/3 Nuts

11/4 Bolts

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Remove bottom engine compartment paneling

AR61.20-P-1105M

2

Separate plug connections of lambda and diagnostic sensors

AR14.00-P-5303AA

3

Support exhaust system with transmission jack and transmission platform

*WE58.40-Z-1030-11A

*WE58.40-Z-1018-11A

4

Unscrew copper nuts (11/2) from bracket at transmission

Installation: Replace copper nuts.

5

Unscrew bolts (11/1) of flange connection of front exhaust system from exhaust manifold

Installation: Install new bolts (11/1).

If thread in exhaust manifold is
damaged:

Replace rivet nuts in the exhaust manifold.

AR49.10-P-5531-01DA

Bolts

*BA14.10-P-1002-01B

6.1

Detach vacuum hose from switchover valve of exhaust flap (Y93)

If cylinder shutoff code 479 fitted.

7

Remove cross strut (35) together with rubber mount (9/1)

8

Remove rubber mount (9/2)

9

Unscrew bolts (11/5) and remove rubber mount (9/4)

Installation: Inspect exhaust rubber mount (9/4) for damage, replace if required.

10

Unscrew bolts (11/4) and nuts (11/3) and remove rubber mount (9/3)

Installation: Inspect exhaust rubber mount (9/3) for damage, replace if required.

11

Lower transmission jack and lift out exhaust system

12

Install in the reverse order

13

Inspect installation position and clearance of exhaust system

Install exhaust system free of stress.

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the running engine

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

14

Carry out engine test run

Inspect exhaust system for leaks.

Exhaust manifold

Number

Designation

Engines 113.940/941/
942/943/944/
945/946/948/
960/961/962/
963/964/965/
966/967/968/
969/971/980/
981/982/984/
986/992/993/
995

BA14.10-P-1002-01B

Flange connection, exhaust manifold and front exhaust pipes

Nm

20

Workshop equipment

WE58.40-Z-1018-11A

Transmission platform

WE58.40-Z-1030-11A

Transmission jack

Henviste dokumenter